installing 9front on pc engines apu2 ==================================== connect linux to apu2 using usb to db9f serial cable attach usb drive containing 9front.iso to apu2 on linux run as root: screen /dev/ttyUSB0 115200 8N1 power on apu2; the boot messages should appear in screen press f10 for boot menu if the usb drive is not visible in the menu, choose 'setup', then exit setup with 'x', and press f10 again after apu2 has reset the usb drive should now be visible in the boot menu select the usb drive and immediately after that press any key to enter 9front's interactive boot console ('>' prompt, see 9boot(8)). then type: console=0 b115200 boot (the console may print out the characters duplicated but it is ok) after system has booted (as glenda), run the installer as usual: inst/start the installer writes the "console=0 b115200" to plan9.ini automatically so the reboot after the installation should work ok note: use backspace to send del character (interrupt note) in screen